Month: August 2024

Posted on

Top 10 Benefits of Installing Garage Door Safety Sensors in Your Home

Garage Door Safety Requirements

Top 10 Benefits of Installing Garage Door Safety Sensors in Your Home

When it comes to home safety, garage door safety sensors play a crucial role that often goes unnoticed. 

These sensors are designed to prevent accidents and ensure that your garage door operates smoothly. 

If you’re considering installing or upgrading these sensors, here are the top 10 benefits you’ll gain through incorporating garage door safety sensors into your home.

1. Enhanced Safety for Your Family

The primary benefit of garage door safety sensors is the added safety they provide. 

These sensors detect objects or people in the door’s path, ensuring that the door doesn’t close on them. 

This is especially important if you have young children or pets who might accidentally wander into the door’s path.

2. Accident Prevention

Garage door safety sensors help prevent accidents that can occur if the door closes while something or someone is in its way. 

Without these sensors, the risk of injuries or damage to property is higher. 

Through installing safety sensors, you reduce the chance of such incidents, making your home a safer place.

3. Improved Door Functionality

Safety sensors enhance the overall functionality of your garage door. 

They ensure that the door operates correctly, reversing direction if something obstructs its path. 

This not only prevents accidents but also keeps your garage door working efficiently.

4. Increased Property Value

Homes with updated safety features often see an increase in property value. 

Garage door safety sensors are a valuable addition that can make your home more attractive to potential buyers. 

They demonstrate that you prioritize safety, which can be a significant selling point.

5. Reduced Maintenance Costs

Through preventing accidents and damage, garage door safety sensors help reduce the need for costly repairs. 

If your garage door encounters fewer problems, you’ll spend less on maintenance and repairs over time. 

This can save you money and hassle in the long run.

6. Peace of Mind

Knowing that your garage door has safety sensors installed gives you peace of mind. 

You can rest easy knowing that these sensors are working to keep your family safe and prevent accidents. 

This added reassurance is invaluable for any homeowner.

7. Compliance with Safety Standards

Many local regulations and safety standards require the installation of garage door safety sensors. Through installing these sensors, you ensure that your home complies with these standards, avoiding potential fines or issues with insurance claims.

8. Ease of Use

Garage door safety sensors are designed to be user-friendly. 

Once installed, they work automatically without requiring any additional input from you. 

This ease of use means you can rely on them to keep your garage door functioning safely and efficiently without constant attention.

9. Protection for Vehicles

If you often park your vehicle in the garage, safety sensors provide protection against accidental damage. 

If an object or vehicle is detected in the door’s path, the sensors will stop the door from closing, preventing any potential damage to your car or other items in the garage.

10. Adaptability to Modern Technology

Many modern garage door safety sensors are compatible with smart home systems. 

This means you can integrate them with your home automation setup for added convenience. 

You can monitor and control your garage door remotely, adding another layer of safety and ease to your home.

Why Garage Door Safety Sensors Are a Wise Investment

Installing garage door safety sensors offers numerous benefits that enhance both safety and convenience in your home. 

From preventing accidents and reducing maintenance costs to increasing property value and providing peace of mind, these sensors are a wise investment for any homeowner.

At Peter&Sons, we understand the importance of home safety and are dedicated to providing top-quality garage door solutions. 

We offer a range of products and services to ensure that your garage door is equipped with the best safety features available. 

Visit our website to explore how we can help you upgrade your garage door system with reliable safety sensors and other advanced solutions. 

With our expertise, you can enjoy all the benefits of garage door safety sensors and more.

You might like these

Posted on

Garage Door Safety Sensor Not Working? Top 10 Troubleshooting Tips

Garage Door Safety Requirements

Garage Door Safety Sensor Not Working? Top 10 Troubleshooting Tips

Having a garage door safety sensor that’s not working can be frustrating and even dangerous. 

These sensors are crucial for preventing accidents through ensuring your door doesn’t close on something or someone. 

If you’re facing issues with your garage door safety sensor, follow these top 10 troubleshooting tips to get it back in working order.

1. Check the Sensor Alignment

One of the most common issues with a garage door safety sensor not working is misalignment. 

Ensure that both sensors are aligned properly. 

They should face each other directly. If they’re out of line, gently adjust them until they’re facing each other and level.

2. Clean the Sensor Lenses

Dirt and debris on the sensor lenses can obstruct the sensor’s beam, causing it to malfunction. 

Use a soft cloth to clean the lenses of both sensors. 

Be sure not to use any harsh chemicals or abrasive materials that could damage the sensors.

3. Inspect for Obstructions

Sometimes, objects like leaves or dirt can block the sensor’s path. 

Check for any obstructions between the sensors and remove them. 

Even a small obstruction can interfere with the sensor’s function.

4. Examine the Wiring

Damaged or disconnected wires can cause the sensors to stop working. 

Inspect the wiring connected to each sensor. 

If you find any frayed or disconnected wires, repair or replace them as needed.

5. Check the Power Supply

Ensure that the garage door opener is receiving power. 

If the sensor is not getting power, it won’t function correctly. 

Verify that the power source is working and that there are no issues with the circuit breaker.

6. Test the Sensors

Most sensors have a test feature that can help diagnose issues. 

Consult your garage door opener’s manual for instructions on how to test the sensors. 

Follow the guidelines to ensure they’re working properly.

7. Look for Faulty Wiring Connections

Sometimes, the problem might be with the connections rather than the wires themselves. 

Check the connections where the wires meet the sensors and the opener. 

Ensure they are secure and free of corrosion.

8. Inspect the Sensor Lights

Many garage door safety sensors have indicator lights that show if they’re working. 

If the lights are off or blinking inconsistently, this might indicate a problem. 

Refer to your manual to understand what the light signals mean.

9. Reset the Garage Door Opener

A reset can sometimes resolve issues with the safety sensor. 

Unplug the garage door opener from the power source, wait for about 30 seconds, and then plug it back in. 

This can sometimes reset the system and fix the sensor issue.

10. Replace Faulty Sensors

If none of the above tips work, the sensors themselves might be faulty. 

If you’ve tried all troubleshooting steps and the problem persists, it might be time to replace the sensors. 

Consult a professional if you’re unsure how to do this yourself.

Ensuring Your Garage Door Safety

If your garage door safety sensor is not working, addressing the issue promptly is essential to ensure safety and proper functioning. 

Regular maintenance and quick fixes can help prevent many common problems.

At Peter & Sons, we understand the importance of a fully functioning garage door safety system. 

If you need assistance with repairs or replacements, we’re here to help. 

Our team provides reliable service to ensure your garage door operates safely and efficiently. 

For more information or to schedule a service, visit us at Peter & Sons. 

We’re committed to keeping your home secure and your garage door in top shape.

You might like these

Posted on

10 Simple Steps to Boost Security During Garage Door Safety Month

Garage Door Safety Requirements

10 Simple Steps to Boost Security During Garage Door Safety Month

Garage Door Safety Month is the perfect time to focus on securing one of the most vulnerable entry points to your home. 

With a few simple steps, you can greatly enhance the safety and security of your garage door, ensuring peace of mind for you and your family.

In this guide, we’ll walk you through ten straightforward actions you can take to strengthen your garage door’s security.

1. Check the Door's Balance

The balance of your garage door plays a crucial role in its overall security and function. 

An unbalanced door can be a sign of worn-out springs or other components, which could lead to a malfunction. 

To check the balance, disconnect the garage door opener and manually lift the door. 

If it doesn’t stay open about three to four feet off the ground, it’s time to call a professional for an adjustment. 

This is a simple yet effective step to take during Garage Door Safety Month.

2. Inspect the Garage Door Opener

Your garage door opener should have a rolling code feature that changes the access code each time the remote is used. 

This prevents would-be thieves from capturing your code and gaining entry. If your opener doesn’t have this feature, consider upgrading to a more secure model. 

Regularly testing the opener to ensure it’s working correctly is another essential step during Garage Door Safety Month.

3. Secure the Emergency Release

The emergency release is a necessary feature, but it can also be a security weakness if not properly secured. 

During Garage Door Safety Month, make sure the emergency release cord is out of reach of potential intruders. 

Consider adding a zip tie to the release latch to prevent easy access. 

Just be sure the tie is easily breakable in case of an actual emergency.

4. Test the Auto-Reverse Feature

The auto-reverse feature is designed to prevent accidents through automatically reversing the door if it encounters an obstruction. 

Testing this feature is a must during Garage Door Safety Month. 

Place a small object like a block of wood in the door’s path and attempt to close it. 

If the door doesn’t reverse immediately, this is a sign that the feature is not functioning properly and needs to be addressed.

5. Reinforce the Door Itself

A weak or outdated garage door can be a major security risk. 

If your door is made of lightweight materials, consider reinforcing it with a metal or solid-core upgrade. 

For those who prefer not to replace the door, adding a layer of plywood to the interior can also improve its strength. 

Ensuring your door is sturdy is a critical step in boosting security during Garage Door Safety Month.

6. Install Motion Sensor Lights

Motion sensor lights are an effective deterrent against intruders. Installing these lights around your garage is a simple and cost-effective way to enhance security. 

These lights will automatically turn on when they detect movement, potentially scaring off anyone attempting to gain entry. 

This is an easy improvement to make during Garage Door Safety Month.

7. Keep the Garage Door Closed

This might sound obvious, but many people forget to close their garage doors when they leave or even while they’re home. 

An open garage door is an invitation for trouble. 

Make it a habit to check that the door is closed whenever you leave the house or go to bed. 

During Garage Door Safety Month, consider installing a garage door monitor or smartphone app to alert you if the door is left open.

8. Secure the Garage Door Remote

Leaving your garage door remote in your car, especially if it’s parked outside, is a common mistake. 

During Garage Door Safety Month, get into the habit of taking the remote with you when you exit the car. 

Better yet, consider replacing the remote with a keychain version that you can easily carry with you.

9. Add a Lock to the Garage Door

A manual lock can provide an extra layer of security. 

This is especially useful if you’re going on vacation or won’t be using the garage for an extended period. 

A sturdy padlock or a garage door side lock can prevent the door from being opened manually from the outside.

It’s a small but effective measure to consider during Garage Door Safety Month.

10. Inspect and Replace Weather Stripping

Weather stripping along the bottom of your garage door isn’t just for insulation; it also helps to keep out pests and moisture. 

However, old or damaged weather stripping can create gaps that could be exploited through intruders. 

Inspect the weather stripping during Garage Door Safety Month and replace it if it’s worn out. 

This simple task will not only improve security but also help maintain the door’s longevity.

Why We Care About Your Garage Door Safety

During Garage Door Safety Month, taking these simple steps can significantly enhance the security of your garage and home. 

At Peter and Sons Construction, we understand the importance of keeping your family safe. 

That’s why we offer a range of services to ensure your garage door is secure and functioning properly. 

If you need a tune-up, a new installation, or advice on improving your garage door’s security, we’re here to help. 

We believe in providing quality service without the hard sell because your safety is our priority. 

Visit us at Peter and Sons Construction to learn more about how we can assist you this Garage Door Safety Month.

You might like these

Posted on

Top 10 Garage Door Safety Requirements to Protect Your Family

Garage Door Safety Requirements

How to Properly Align Your Garage Door Safety Sensors?

When it comes to keeping your family safe, following the correct garage door safety requirements is crucial. 

The garage door is one of the most significant moving parts of your home, and if not maintained properly, it can pose serious risks. 

These safety requirements can prevent accidents and injuries. In this guide, we’ll walk you through the top 10 garage door safety requirements that every homeowner should know.

1. Regularly Inspect the Garage Door’s Condition

One of the most important garage door safety requirements is to perform regular inspections. 

Check the door’s hardware, springs, cables, and rollers for signs of wear and tear. 

If any parts appear worn or damaged, replace them immediately. 

A garage door in poor condition can malfunction and cause harm to anyone nearby.

2. Test the Auto-Reverse Feature

The auto-reverse feature is a mandatory safety requirement for modern garage doors. 

This feature causes the door to reverse if it encounters an obstacle while closing. 

To test it, place a solid object, like a piece of wood, in the door’s path.

 If the door doesn’t reverse upon contact, it’s a sign that the feature needs to be repaired or adjusted.

3. Keep the Door’s Sensors Clean and Aligned

Garage door sensors are responsible for detecting objects in the door’s path. 

Dirty or misaligned sensors can fail to detect obstacles, leading to potential accidents.

 Make it a habit to clean the sensors regularly and ensure they are properly aligned. 

This is a simple yet essential garage door safety requirement.

4. Teach Your Family About Garage Door Safety

Educating your family, especially children, about garage door safety is crucial.

Make sure everyone knows not to play around or under the garage door, and teach them how to operate it safely. 

This knowledge can prevent accidents and ensure everyone in the household is aware of the potential dangers.

5. Never Leave the Garage Door Partially Open

Leaving the garage door partially open can be dangerous. When you activate the door again, it may move downward, potentially causing injury. 

Always ensure the door is either fully open or fully closed. This simple practice aligns with standard garage door safety requirements and minimizes risks.

6. Secure the Garage Door Opener

The remote control for your garage door opener should be kept in a secure location, out of reach of children. 

Additionally, never leave the remote in your car, especially if it’s parked outside. A stolen remote can provide easy access to your home. 

Following this safety requirement protects not only your garage but your entire home.

7. Perform Regular Maintenance

Regular maintenance is key to ensuring your garage door operates safely and efficiently. 

Lubricate the door’s moving parts, tighten bolts and screws, and replace any worn components. 

Routine maintenance checks are one of the most effective garage door safety requirements, helping you avoid unexpected failures.

8. Install a Garage Door Surge Protector

Electrical surges can damage the garage door opener, rendering the auto-reverse feature and other safety mechanisms inoperable.

 Installing a surge protector is a garage door safety requirement that protects your opener from damage, ensuring it continues to function correctly even during power fluctuations.

9. Check the Balance of the Garage Door

A properly balanced garage door is less likely to cause accidents. 

Disconnect the opener and manually lift the door halfway. 

If it stays in place, it’s balanced. If it moves up or down, the springs might need adjustment. 

Keeping the door balanced is a crucial safety requirement to prevent sudden movements that could harm someone.

10. Replace Old Garage Door

If your garage door is more than 15-20 years old, it may not meet current safety standards.

Older doors lack many of the safety features that are now standard. 

Consider replacing an outdated door with a new one that complies with all modern garage door safety requirements.

This investment not only enhances safety but also improves your home’s security and curb appeal.

Ensuring Your Family’s Safety with Proper Garage Door Maintenance

Understanding and implementing these garage door safety requirements is vital for protecting your family.

Regular inspections, testing safety features, and proper maintenance all contribute to a safer home environment.

At Peter & Sons, we understand the importance of keeping your family safe. 

We offer a range of services to help you maintain and repair your garage door, ensuring it meets all the necessary safety requirements. 

If you need a quick inspection, a tune-up, or a complete replacement, we’ve got you covered.

Our team is committed to providing reliable, quality service so you can have peace of mind knowing your garage door is in top condition.

You might like these

Posted on

How to Properly Align Your Garage Door Safety Sensors?

Align Garage Door Sensors

How to Properly Align Your Garage Door Safety Sensors?

Ensuring proper garage door safety sensor alignment is essential for the smooth and safe operation of your garage door. 

Misaligned sensors can prevent the door from closing properly, creating a safety risk for your family and potentially causing damage to the door. 

Here’s a simple guide on how to properly align your garage door safety sensors to keep everything working as it should.

The Importance of Garage Door Safety Sensor Alignment

Garage door safety sensors are a critical component of your garage door system. These sensors, typically located near the bottom of the door tracks, work by sending an infrared beam across the doorway. 

When something obstructs this beam, the sensors trigger the door to stop and reverse, preventing accidents or damage.

However, if the sensors are misaligned, they may not function correctly, causing the door to stay open or close unexpectedly. 

Proper garage door safety sensor alignment ensures that the sensors can accurately detect any obstructions, keeping your garage door safe and reliable.

Step 1 - Inspect the Sensor Lenses

The first step in garage door safety sensor alignment is to inspect the sensor lenses for dirt or debris. Over time, dust, dirt, and grime can accumulate on the lenses, obstructing the infrared beam and leading to alignment issues.

To clean the lenses, use a soft, dry cloth to gently wipe them down. Avoid using harsh chemicals or abrasive materials, as these can damage the sensors. Once the lenses are clean, check to see if the sensors are functioning properly. If they still seem misaligned, move on to the next step.

Step 2 - Check the Alignment

Next, you’ll need to check whether the sensors are aligned correctly. Most garage door safety sensors have small LED lights that indicate whether they are properly aligned. When the sensors are aligned, the LEDs should be steady and not blinking.

To check the alignment, stand at the front of your garage and look at the sensors on either side of the door. 

They should be facing each other directly, at the same height. If the LED lights are blinking or not lit at all, it’s a sign that the sensors are misaligned.

Step 3 - Adjust the Sensors

If you notice that the sensors are not properly aligned, you can adjust them manually. Gently loosen the screws holding the sensors in place, then move them until they are facing each other directly. 

As you adjust the sensors, keep an eye on the LED lightswhen they are aligned correctly, the lights should stop blinking and stay solid.

Make sure to tighten the screws securely after adjusting the sensors to prevent them from moving out of alignment again. If your sensors are mounted on metal brackets, ensure that these brackets are not bent or damaged, as this could also affect alignment.

Step 4 - Test the Alignment

After adjusting the sensors, it’s important to test the alignment to ensure that everything is working properly. Place an object, like a box or broom, in the path of the door while it’s closing. 

If the sensors are aligned correctly, the door should stop and reverse as soon as the object breaks the infrared beam.

If the door doesn’t respond as expected, recheck the alignment and make any necessary adjustments. Testing the sensors regularly can help you catch alignment issues early and keep your garage door operating safely.

Step 5 - Secure the Sensors

Finally, make sure that the sensors are securely mounted to prevent them from shifting out of alignment over time. 

Use a screwdriver to tighten the screws holding the sensors in place, and consider using zip ties or additional brackets if needed to keep the sensors stable.

Properly securing the sensors will help maintain their alignment and ensure that they continue to function correctly. 

Regular maintenance, including checking and adjusting the sensors as needed, will keep your garage door in good working order and prevent potential safety hazards.

Keeping Your Garage Door Safe with Peter & Sons

At Peter & Sons, we know how important it is to keep your garage door operating safely and efficiently. Proper garage door safety sensor alignment is a key part of maintaining your door’s functionality. 

We offer a range of services to help you keep your garage door in top condition, from routine maintenance checks to repairs and installations. 

Our team is dedicated to providing the support you need to ensure your garage door system works perfectly, every time. 

Through taking care of your garage door sensors and staying on top of maintenance, we can help you avoid issues and keep your home safe.

You might like these

Posted on

How to Easily Reset Garage Door Safety Sensors?

Reset Garage Door Sensors

How to Easily Reset Garage Door Safety Sensors?

Garage door safety sensors are essential for keeping you and your family safe. 

When these sensors malfunction, it can be frustrating and potentially dangerous. 

If you know how to reset garage door safety sensors can save you a lot of trouble and ensure your garage door operates smoothly.

What Are Garage Door Safety Sensors?

Garage door safety sensors are small devices placed near the floor on either side of the garage door. 

They work by emitting an invisible beam of light from one sensor to the other. If something blocks this beam, the sensors signal the garage door opener to stop closing and reverse direction. 

This safety feature prevents accidents and injuries, especially for children and pets.

Common Issues with Garage Door Safety Sensors

Before learning how to reset garage door safety sensors, it’s important to understand common issues that can cause them to malfunction:

  • Obstructions – Dirt, leaves, or other debris can block the sensors, causing them to misbehave.
  • Misalignment – If the sensors are not properly aligned, the beam of light may not connect, leading to sensor failure.
  • Wiring Problems – Damaged or frayed wires can disrupt the connection between the sensors and the garage door opener.
  • Sunlight Interference – Direct sunlight can interfere with the sensor’s beam, causing false readings.

Step-by-Step Guide to Resetting Garage Door Safety Sensors

Step 1 - Check for Obstructions

The first step in how to reset garage door safety sensors is to ensure there are no obstructions. 

Clean the area around the sensors, removing any dirt, leaves, or objects that could be blocking the beam.

Step 2 - Inspect the Sensors

Look at both sensors to ensure they are facing each other directly. If they appear to be misaligned, gently adjust them until they are properly aligned. 

Most sensors have a small LED light that indicates if they are aligned correctly. When aligned, these lights should be solid, not blinking.

Step 3 - Clean the Sensors

Use a soft cloth to clean the lenses of both sensors. Sometimes, dust or cobwebs can cover the lenses, preventing the sensors from functioning properly.

Step 4 - Check the Wiring

Inspect the wires connected to the sensors for any signs of damage or wear. If you notice any frayed or broken wires, you may need to replace them. 

Ensure all connections are secure and tight.

Step 5 - Reset the Sensors

To reset the sensors, follow these steps:

  • Disconnect the Power – Unplug the garage door opener from the power outlet. If your opener is hardwired, turn off the circuit breaker that powers the garage door.
  • Wait a Few Minutes – Allow a few minutes for the system to reset.
  • Reconnect the Power – Plug the opener back in or turn the circuit breaker back on.

Step 6 - Test the Sensors

After resetting the sensors, test the garage door to ensure it operates correctly. Close the garage door and see if it responds properly when the beam is interrupted. 

If it reverses direction upon sensing an obstruction, the sensors are working as they should.

Troubleshooting Persistent Issues

If your sensors still aren’t working after following these steps, you may need to dig a little deeper. Here are a few additional troubleshooting tips:

  • Check the Sensor Alignment Again – Even a slight misalignment can cause issues. Use a level to ensure both sensors are perfectly aligned.
  • Inspect the Sensor Lights – If the LED lights on the sensors are not lit, or one is blinking, there may still be a problem.  Refer to your garage door opener’s manual for specific troubleshooting tips related to the LED light indicators.
  • Consult the Manual – Every garage door opener model is slightly different. Consult your opener’s manual for any model-specific instructions on how to reset garage door safety sensors.
  • Call a Professional – If you’ve tried everything and the sensors still aren’t working, it might be time to call a professional.  Garage door systems can be complex, and a professional can diagnose and fix

Keeping Your Garage Door Safe and Functional

Resetting your garage door safety sensors is a straightforward process that can save you time and ensure your garage door operates safely. 

Regular maintenance and quick fixes can prevent bigger issues down the line.

At Peter and Sons Construction, we understand the importance of a safe and functional garage door. If you’re facing persistent issues or need expert assistance, our team is here to help. 

We offer a range of services, from garage door repair to full installations, ensuring your home is secure and convenient. 

Visit Peter and Sons Construction to learn more about our services and how we can assist you.

You might like these

Posted on

How to Properly Align Safety Sensors on Garage Doors?

Align Safety Sensors

How to Properly Align Safety Sensors on Garage Doors?

When the power goes out or you face a garage door malfunction, knowing how to reset the emergency garage door release can save you a lot of hassle. 

This process might seem overwhelming but with the right steps, you can easily reset your garage door and get it back in working order.

Garage Door Safety Sensors

It’s important to understand what garage door safety sensors do. These sensors are designed to prevent accidents by detecting objects in the path of the closing door. 

If an object is detected, the door automatically stops and reverses, preventing injury or damage. The sensors are typically mounted on either side of the garage door, near the floor.

Signs Your Safety Sensors Need Alignment

Misaligned sensors can lead to various issues, including the door not closing properly or reversing unexpectedly. Here are some signs that your safety sensors may need alignment:

  • Blinking Sensor Lights – Most sensors have indicator lights that blink when there’s a problem.
  • Garage Door Won’t Close – If the door starts to close but then reverses, it might be due to sensor issues.
  • No Indicator Light – If the sensor lights are off, they may be misaligned or there could be a wiring problem.
align safety sensor

Tools You'll Need

To align your garage door safety sensors, you’ll need a few basic tools:

  • A screwdriver
  • A level
  • A soft cloth

Steps to Align Garage Door Safety Sensors

Step 1 - Turn Off the Power

Safety first! Before starting any repairs or adjustments, turn off the power to your garage door opener. This will prevent accidental activation while you’re working on the sensors.

Step 2 - Locate the Sensors

The sensors are usually mounted about six inches above the ground on either side of the garage door. They are small devices with lenses that face each other.

Step 3 - Clean the Sensors

Dirt and debris can obstruct the sensor lenses, causing them to malfunction. Use a soft cloth to gently clean the lenses on both sensors. Avoid using harsh chemicals that could damage the sensors.

Step 4 - Check the Alignment

Once the sensors are clean, check their alignment. The lenses should be facing each other directly. 

Use a level to ensure they are perfectly horizontal. If they are not aligned, you’ll need to adjust their positions.

Step 5 -Adjust the Sensors

Loosen the screws holding the sensors in place using a screwdriver. Adjust the sensors until the indicator lights on both sensors are steady and not blinking. 

Use the level to confirm they are aligned horizontally.

Step 6 - Secure the Sensors

Once the sensors are aligned, tighten the screws to secure them in place. Make sure the sensors do not move while tightening the screws.

Step 7 - Test the Sensors

After securing the sensors, turn the power back on and test the garage door. Close the door using the remote or wall switch and see if it operates smoothly without reversing. If the door closes properly, your sensors are correctly aligned. If not, you may need to repeat the alignment process.

Troubleshooting Common Issues

Sometimes, even after aligning the sensors, you might encounter issues. Here are a few troubleshooting tips:

  • Check the Wiring – Ensure the wires connecting the sensors to the garage door opener are not damaged or loose.
  • Inspect the Mounting Brackets  – If the brackets holding the sensors are bent or damaged, they may need to be replaced.
  • Look for Obstructions – Ensure nothing is blocking the sensor lenses, including spider webs or small objects.
align safety sensor

Maintaining Your Garage Door Sensors

Regular maintenance can prevent many common issues with garage door safety sensors. Here are some tips to keep your sensors in good working order:

  • Clean the Lenses  – Regularly clean the sensor lenses to prevent dirt and debris buildup.
  • Check Alignment – Periodically check the alignment of the sensors and adjust them if necessary.
  • Inspect Wiring – Look for signs of wear or damage in the wiring and repair or replace as needed.

Keeping Your Garage Door Safe

If you know how to align garage door safety sensors is essential for maintaining a safe and functional garage door. 

Misaligned sensors can cause inconvenience and pose safety risks, but with a few simple steps, you can keep your sensors in perfect working order.

At Peter & Sons Construction, we pride ourselves on providing top-notch garage door services. From regular maintenance to emergency repairs, our team is here to help you keep your garage door operating smoothly. 

If you’re ever in doubt or need professional assistance, don’t hesitate to reach out to us. We offer a range of services to ensure your garage door is always in the best condition. 

Even it’s sensor alignment, opener installation, or routine maintenance, we’ve got you covered. 

Aligning your garage door safety sensors may seem daunting at first, but with these straightforward steps, you can handle it with confidence. 

Regular maintenance and timely adjustments are key to preventing issues and ensuring the safety of your garage door system.

You might like these